United States Department of Agriculture
Natural Resources Conservation Service		 Washington Go to Accessibility Information
Skip to Page Content



National Map Symbol Handbook Drawings

The following files require AutoCAD, Adobe Reader or WinZip

All drawings (DWG) will work in AutoCAD Version 14 and higher or AutoCAD LT 98 and higher.  Drawings were formatted following the "West Region CAD Standards".  Use the WA-NRCS-ALT.ctb plot style file to setup the alternate pen thicknesses.  This will assure the plotted lines do not look to heavy.

The following symbols may contain attributes that aid in filling out the necessary drawing information.  The symbols are drawn to one square unit, therefore, if your drawing is a 20 scale you should insert the symbol at a factor of 20.

DWG NAME

ISSUE DATE

DWG TITLE

Adobe
Reader

DWG
Download
Mapsym 6/01 Index of Symbol Drawings (PDF; 47 KB) ----
Aughole 6/01 Existing Auger Hole ----

(DWG; 23 KB)
Bmark 6/01 Benchmark ---- (DWG; 23 KB)
Cp-hor 6/01 Control Point-Horizontal ---- (DWG; 23 KB)
Cp-horver 6/01 Control Point-Horizontal and Vertical ---- (DWG; 23 KB)
Cp-ver 6/01 Control Point-Vertical ---- (DWG; 23 KB)
Drhole 6/01 Existing Drill Hole ---- (DWG; 23 KB)
Pump 6/01 Pump-Planned ---- (DWG; 23 KB)
Pump-x 6/01 Pump-Existing ---- (DWG; 23 KB)
Riser 6/01 Pipe Riser-Planned ---- (DWG; 23 KB)
Riser-x 6/01 Pipe Riser-Existing ---- (DWG; 23 KB)
Road-fed 6/01 Road-Federal ---- (DWG;  5 KB)
Road-int 6/01 Road-Interstate ---- (DWG; 5 KB)
Road-st 6/01 Road-State ---- (DWG; 23 KB)
Sign 6/01 Sign ---- (DWG; 23 KB)
Sprgdev 6/01 Spring Development-Planned ---- (DWG; 26 KB)
Sprgdev-x 6/01 Spring Development-Existing ---- (DWG; 27 KB)
Sprgtrof 6/01 Spring/Trough-Planned ---- (DWG; 5 KB)
Sprgtrof-x 6/01 Spring/Trough-Existing ---- (DWG; 24 KB)
Spring 6/01 Spring ---- (DWG; 5 KB)
Swamp 6/01 Swamp ---- (DWG; 5 KB)
Testpit 6/01 Test Pit-Existing ---- (DWG; 23 KB)
Tiledrn 6/01 Tile Drain-Existing ---- (DWG; 9 KB)
Trough 6/01 Trough-Planned ---- (DWG; 25 KB)
Trough-x 6/01 Trough-Existing ---- (DWG; 24 KB)
Well 6/01 Well-Planned ---- (DWG; 23 KB)
Well-art 6/01 Well-Artesian ---- (DWG; 5 KB)
Well-irr 6/01 Well-Irrigation ---- (DWG; 5 KB)
Well-x 6/01 Well-Existing ---- (DWG; 23 KB)
Wetspot 6/01 Wet Spot ---- (DWG; 5 KB)
Wtank 6/01 Water Tank-Planned ---- (DWG; 23 KB)
Wtank-x 6/01 Water Tank-Existing ---- (DWG; 23 KB)
SYM-ALL 6/01 All above block drawings ----

(ZIP; 93 KB)


< Back to... Block Drawings